Write code for people: Dos and don’ts to improve your React code

During the last couple of years I have reviewed many pull requests of React applications. I consistently observed in different developers some practices that could be improved just by keeping in mind the following sentence:

I am writing code for other people.

Why write code for humans?

Either if you are writing enterprise applications or creating an open source project, your code is going to be read and maintained by humans. This is a mantra you must always keep in mind.

Some readers may pose that code is run on machines, so if the code is not efficient you cannot consider it good code. That’s a good point, but if the code is readable bot not efficient, it will be easier to understand where to change it to make it faster.

Good code that is developer-friendly has several advantages.

  1. It is more pleasant to read and easier to understand.

  2. Reduces onboarding time. Development teams sometimes need more capacity, so new staff or consultants may join the team. On those cases, human centered code makes on boarding much smoother and less time costly.

  3. Takes less time to maintain. It is very common to spend a lot of time in an application/library, then you release it, and, for a while, you don’t modify it. One day, after some months you need to change something and… guess what, now you don’t remember what you did, so you need to read your own code.

Dos and don’ts to make : Recipes / Tips

We’ll start with some general JavaScript tips and then move to more specific tips for React.

Do use significant names in variables.

Whenever you create a variable ask yourself: Does the name of a variable convey what is the content of the variable?

In general, follow these rules:

  1. Use the shortest name,
  2. But also be as precise as possible.
 //  ❌  Not good
 const list = ['USA', 'India', 'Peru', 'Spain']
 list.map(item => console.log(item))

 //  ✅  Better
 const countries = ['USA', 'India', 'Peru', 'Spain']
 countries.map(country => console.log(country))

In general do not use generic names such as list, item, they are short but not very meaningful. A list can contain anything and it will not give any clue about its contents to the reader of your code. A more precise name, such as countriesin the example above, is better.

Also, I personally prefer to avoid acronyms in variables as they may be harder to understand for junior/new developers.

 //  ❌  Not that good
const handleClk = e => { 
	console.log("User clicked the button" + e.current.value) 
}

//  ✅  Better
const handleClick = event => { 	
	console.log("User clicked the button" + event.current.value) 
}

This “rule” makes the code more verbose but also easier to understand.

In other languages like Python it is common to use acronmys/abreviated versions - for example when importing modules - which is somewhat fine as these are widely spread conventions across existing documentation, examples and even novice learners.

# Typical way of renaming modules in python
import numpy as np
import tensorflow as tf
import seaborn as sns

The rational of this convention is to type less, be more productive (Now with autocomplete of the editors is no longer true), make the code less verbose and “faster” to read for expert eyes.

Following this idea, there may be cases in JavaScript in which you use shorter versions, for example:

// doc instead of document 
const doc = createNewDocument()

As summary, do give some thought when naming variables in your code. I believe this is one of the hardest part of software development and it differentiates good developers from bad developers.

Do use consistent names across the app.

Give good names to variables is not enough, they have to be consistent across the whole react app.

To solve complex problems we create small independent logic units. We follow the strategy of divide and conquer to make it easier. We implement components in an isolated way, they have some inputs and throw some output. However, we should not forget these units belong to a higher order organism, your application.

Ask yourself upon creating a variable, function, component or a file, if its name is consistent with the names already used in the application. Example:

  //  ❌  Not that good
  //File1.jsx
  const sectorsData = useSelector(sectorsSelector)
  
  //File2.jsx
  const sectorsList = useSelector(sectorsSelector)
  

   //  ✅  Better
  //File 1
  const sectors = useSelector(sectorsSelector)
  
  //File 2
   const sectors = useSelector(sectorsSelector)

For files:

  • /redux/constants/<entity>Constants.js
  • /redux/actions/<entity>Actions.js
  • /redux/selectors/<entity>Selector.js
  • etc..

Do follow the Don’t repeat yourself (DRY) principle.

That is, if you see that your are repeating similar code or logic in two places, refactor that code to use a function, component, etc.

  //  ❌  Not that good
  const getPdfName = (country) => { 
    const now = new Date()
    const pdfName = `${country}-${now.getFullYear()}-${now.getMonth()}-${now.getDay()}.pdf` 
    return pdfName
  }

  const getExcelName = (country) => { 
    const now = new Date()
    const xlsName = `${country}-${now.getFullYear()}-${now.getMonth()}-${now.getDay()}.xls` 
    return xlsName
  }
  
  //  ✅  Better
  const buildFilename = (name, extension) => {
    const now = new Date()
    return `${name}-${now.getFullYear()}-${now.getMonth()}-${now.getDay()}.${extension}` 
  }

   const gePdfName = (country) => {  
    return buildFileName(country, '.pdf')
   }

  const getExcelName = (country) => { 
   return builExcelName(country, '.xls')
  }

Do keep files short

I use 200 lines as a benchmark. Specially when we talk about React components, if you have a file that has more than 200 lines, ask yourself if you can split it in smaller components.

Also, if the large majority of your component code is for fetching and processing data, think about moving that code to support/helper files. For example, you can create a folder /src/lib/ and keep there your utility functions.

Also, it is not advisable to have more than a certain amount of files (~10-20) in the same folder. Structuring the folder into sub-folders makes the project more readable.

Do create a compact code.

  // ❌ Not that good
  const handleClick = newValue => {
    const valueAsString = newValue.toString()
    if (onClick !== undefined) {
      onClick(valueAsString)
    }
  };
  
  // ✅ Better
  // Previous code in 1 single line.
  const handleClick = newValue => onClick && onClick(newValue.toString())

Although compact code as a general principle is good, it may sometimes obfuscate what is the code actually doing. So:

Do document your code.

Specially for helper functions the interface needs to be clear.

Do include comments for pieces of code that may not be very obvious. Example:

  // ❌ Not that good
  editor.countWorths= nodes => {
    const content = editor.serialize(nodes);
    return content.length ? content.match(/\b[-?(\w+)?]+\b/gi).length : 0;
  }
  
  // ✅ Better
  /**
   * Counts the number of words within the passed nodes
   *
   * @param {Node} SlateJS nodes
   * @returns {integer} Number of words
   */
  editor.countWords = nodes => {
    const content = editor.serialize(nodes); // one string with all node contents
    //Extracts number of words with the regex unless empty string (0)
    return content.length ? content.match(/\b[-?(\w+)?]+\b/gi).length : 0;
  };

Do use linters and code formatters

Linters are code analyzers that provide estilistic suggestions. The most widely spread in Javascript is esLint. Setting it up in a react application is pretty easy.

The other tool that will make your code more readable and save you time is a code formatter. It will indent and break the lines of your code. It will really make your code much easier to read and will save you time. In JavaScript we are lucky, we have prettier that formats your code on save.

Do use on and handle as prefix on event props and handlers

This is a de facto standard on React naming conventions. It is widely used on the official react documentation and gives the reader a cue on what is the prop for.

For event props use on as prefix (for instance, onClick, onSubmit, onBlur).

For the handlers of those events use the prefix handle (for instance, handleClick, handleSubmit, handleBlur).

	// ❌ Not that good
	export default function SendEmailForm (sendEmail) {

	/// process / validate email form
	sendEmailWasClicked(event) {
	  sendEmail && sendEmail(formFields)
	}
	
	return(
	 <form>
	   ...
	   <input type="submit" onClick={sendEmailWasClicked}>
	    Send email
	   </input>
	   ...
	 </form>
	)
	
	// ✅ Better
	export default function SendEmailForm (onSendEmail) {

	  handleSubmit(email) {
	    // process email info
	    // ...
	    //
	    onSendEmail && onSendEmail(email)
	  }
	
	  return(
	   <form>
	     ... 
	     <input type="submit" onClick={handleSubmit()}>
	       Send email
	     </input>
	     ...
	 </form>
	)

Do not add handler code in the render

In my experience it makes the code harder to read when the logic of the handler is within the render.

  // ❌ Not that good
  <button onClick={() => {
    if (name==='') {
  	   setError("Name is mandatory")
  		return
  	 }
  	 if (surname==='') {
  	   setError("Name is mandatory")
  		return
  	 }
  	 onSubmit && onSubmit({name, surname})
  }}>Submit</button>

  	// ✅ Better
    const handleOnSubmit = () => {
     if (name === '') {
  		 setError("Name is mandatory")
  		 return
  	  }
  	  if (surname === '') {
  		 setError("Surname is mandatory")
  		 return
  	  } 
  	  onSubmit && onSubmit({name, surname})
  	 }
	
	...
	
	return( 
	  ...
  	  <button onClick={handleOnSubmit}>Submit</button>
  	  ...
  	 )

One liners may be ok to make code more compact. Example:

  	// ✅ This is ok
	return (
		<button onClick={() => onCancel && onCancel()}>
			Cancel
		</button>
	)

Do use const by default

Whenever you create a variable use const by default. Use let only when it is going to be assigned several times. Avoid var.

It will save you some hard to find bugs.

	// ❌ Not that good
 	let today = new Date()  // Today 99.9999999% won't be reasigned
 		
 	// ✅ Better
 	 const today = new Date()

Note that you assign a variable when the name is in front of an =. So you can modify Arrays and Objects as constants.

	
	// ✅ This will run 
 	let day = new Date() 
 	day = new Date()
 	
 	// ❌ It will not run
 	const day = new Date() 
 	day = new Date()  // you cannot reasign a const
 	
 	// ✅ This will run 
 	const myObject = { a: 'prop created during assignment' }
 	myObject.b = {b: 'object content can be modified after creation'}
 	
 	const animals = [ 'dog', 'cat']
 	animals.push('lion')

Only when you put a const before = more than once, the code won’t run.

Do use the best maping function in arrays

  1. Use map() for returning an array with the same number of elements.
      const numbers = [1, 2, 3]
      const double =  numbers.map( number => (2 * number)) // [2, 4, 6]
    
  2. Use filter() for returning the items that match a criterium.
      const numbers = [1, 2, 3]
      const double =  numbers.filter( number => (number > 1)) // [2, 3]
    
  3. Use find() for searching the first item that matches a cirterium.

     const numbers = [1, 2, 3]
     const double =  numbers.find( number =>  (number > 1)) // [2]
    
  4. Use forEach() for not returing an array.
      const list = [1, 2, 3] 
      let sum = 0
      list.forEach( number => sum += number) // 6
    

Do handle situations in which there is no value

Example:

  // ❌ Not that good
  export default function MyForm(value, onSubmit) {
    
    //...

    const handleOnSubmit => (newValue) => {
      // do whatever other transformations
      onClick(newValue)
    }
    
    //...

    return (
    {/* this assumes input handles null or empty values correctly */}
      <Input value={value} />
      <Button onSubmit={handleOnSubmit}>Submit</Button>
    }

  // ✅ Better
  const default function MyForm(value, onSubmit) {
    
    //...

    const handleOnSubmit = () => {
    	// It won't do anything BUT won't crash.
    	onClick && onClick(values)
    }

    //...

  }

Example 2:

     // ❌ Not that good
    export default function IndicatorsList({sectors}){
    return(
      <ul>
       {sector.indicators.map(indicator => <li key={indicator.id}>{indicator.text}</> )}
      </ul>
    }

    // ✅ Better
    //It receives the indicator list
    export default function IndicatorsList({indicators}) {
    indicators = indicators || []

    (indicators.length == 0) ? (
      <p>No indicators</p>
    ) : (
    <ul>
    {indicators.map ( indicator => <li key={indicator.id}>{indicator.text}</> )}
    <ul>
    )

Be consistent on the order in which you write the code.

Always follow the same order of the imports, variables and functions within the code of the components.For example, I like the folowing order:

  1. imports
  2. state, variables and constants
  3. useEffects
  4. effect handlers (handleOnClick, etc.)
  5. return() function
  6. Prop defaults and PropTypes

Indeed, for the imports, you may even define an actual order:

  1. React related stuff
  2. General such as react-router
  3. External UI related components
  4. Redux actions, selectors
  5. Hooks
  6. Custom Application UI components

Do add validations for fields and handle form errors.

Gererally, when you read a tutorial or watch a video that teaches react or any other library/programming language, they do not manage errors other than display a console message. Their code is simple, but in real applications user may fill unexpected data, there may be network errors, API may have bug, the user may not have permissions to access a resource, or your authentication token may have expired. Your code has to manage all these situations gracefully and display the appropriate feedback to the user so he can recover from them.

Types of errors and how to manage them from the user experience and from the code point of view is something that requires a deep dive, but we will leave that for another article.

Wrapping up

Always keep in mind:

I write code for other people.

So always try to think if a reader would understand it. Code being consistent, using meaninful variables, document the code, and follow some wide spread conventions. developer (human) friendly code will be much easier to maintain, less prone to errors and if a new team member joins, she/he will be on boarded and productive in less time.

Note that the above mentioned dos and don’ts are general guidelines, and some of the recommendationsmay have corner cases in which you can argue not to follow them, in those cases use your common sense.